機箱機柜指鈑金加工設備(激光切割機、發泡機、數控沖床、折彎機等)加工的箱柜。機箱機柜的應用領域也是非常廣泛。那么如何判斷
濟南機箱機柜的品質好不好？
Cabinet refers to the cabinet processed by sheet metal processing equipment (laser cutting machine, foaming machine, CNC punch, bending machine, etc.). The application field of chassis and cabinet is also very wide. So how to judge the quality of Jinan chassis and cabinet?
1.看鋼板。鋼板須很厚。用手指輕敲就能感覺到哪些厚，哪些薄。
1. Look at the steel plate. The steel plate must be very thick. You can feel which is thick and which is thin by tapping with your fingers.
2.看噴漆。一個合格的機箱機柜，所有的鋼材都需要噴漆，而且噴漆一定要均勻，這樣才能很好的防銹防塵。
2. Look at the painting. For a qualified case and cabinet, all steel should be painted evenly, so as to prevent rust and dust.
3.看架構布局。一般來說，有散熱孔的擋板比較多。一些用來固定電纜的鐵皮要包邊，防止損壞電纜。側壁風扇應安裝在機柜的后壁，因為設備的后部產生大部分熱量。
3. Look at the architecture layout. Generally speaking, there are more baffles with cooling holes. Some iron sheets used to fix cables shall be wrapped to prevent damage to cables. The side wall fan should be installed on the rear wall of the cabinet because the rear of the equipment generates most of the heat.
4.看配件。因為安裝包括網線、電信線、電力線，所以需要購買粘扣帶或者齒形帶，才能有效的將線纜有序的固定在機柜內。如果機柜配有線纜管理模塊，使線纜可以直接固定在垂直安裝導軌上，則很好。
4. Look at the accessories. Because the installation includes network cable, telecommunication cable and power cable, it is necessary to purchase a buckle or toothed belt to effectively fix the cable in the cabinet orderly. If the cabinet is equipped with a cable management module, so that the cable can be directly fixed on the vertical installation rail, it is good.
5.看玻璃。玻璃須更厚。還要注意玻璃周圍是否有裂紋。如果有裂縫，說明有隱患。還有，注意是否有貓膩。6.看功能:考慮的應該是性。
5. Look at the glass. The glass must be thicker. Also pay attention to whether there are cracks around the glass. If there are cracks, there are hidden dangers. Also, pay attention to whether there is any felicity. 6. Look at the function: the first consideration should be security.
7.看散熱情況。估計您的設備會產生多少熱量。一般來說，柜子頂上有兩到四個風扇，風扇越多越好。還有一些螺絲、螺母等。用來固定車架，應該也夠用了。不要因為以后的擴展造成配件不足的困擾。
7. Check the heat dissipation. Estimate how much heat your device will generate. Generally speaking, there are two or four fans on the top of the cabinet. The more fans, the better. There are also some screws, nuts, etc. It should be enough to fix the frame. Don't worry about insufficient parts due to future expansion.
The quality of the chassis and cabinet can be directly affected by the manufacturing process. The steel plate edge of the high-tech chassis will not have burrs, sharp edges, burrs, etc. Moreover, the exposed edges and corners are wrapped, which is not easy to scratch the hands of the installation personnel. Contact us if you need http://www.serie-d.com Come on!
TEL:0531-69922480 18866409905
EMAIL:jntyhc@163.com 
公司地址：濟南市槐蔭區經十西路3788號
備案號：魯ICP備09028695號-3
魯公網安備37010402441282號
首頁
產品
電話
置頂